Do you want to know how to fill water in the inverter battery? If yes, then you have come to the right this place! This blog post will discuss the tips and tricks for filling water in an inverter battery.

We will cover topics such as why it is necessary to add water to the inverter battery, how much water is required, and the best practices for filling water in an inverter battery. Read on to learn all the basics about filling water in an inverter battery.

The Importance of Adding Water to an Inverter Battery

Without proper water levels, your inverter battery will not work optimally, so it is essential to know how to fill the water in your inverter battery.

How to Fill Water in Inverter Battery

How to Fill Water in Inverter Battery

  1. Check the Battery Water Level

The first step to adding water to an inverter battery is to check the level of electrolyte solution inside the battery cells. This can be done by opening the cell caps and looking inside. If the liquid level is below the split ring (which should be visible when looking in the cell), then you need to add water.

  1. Fill Water with Distilled Water

You should never fill an inverter battery with tap water or any other type of water that contains minerals or contaminants. It is important to use distilled water only to ensure that your battery cells remain free from deposits or corrosion that could damage the plates inside.

  1. Add Water Until the Level Reaches Split Ring

Once you have found a clean container and added the distilled water, use a small funnel to slowly pour the water into the cells until the level reaches the split ring. Make sure not to overfill, as this could damage the battery.

  1. Close Cell Caps Securely

Once you have filled each cell with water, close the caps tightly. This will help keep out any debris and contaminants while also helping to maintain a consistent electrolyte level inside the cells.

  1. Charge Battery Regularly

Filling your inverter battery with distilled water is only part of the job. You should also make sure to charge the battery regularly to keep it working at its best. This can be done using either an AC charger or a solar charger, depending on your setup.

Must See: Best Vacuum Cleaner 

Tips and Tricks for Adding Water to an Inverter Battery

Adding water to an inverter battery is easy but can be tricky if you don’t know the right way to do it. Here are a few tips and tricks to help you with this vital task.

  • Ensure you use distilled or dematerialized water to fill your battery. Tap water has minerals and other contaminants that can damage the battery over time.
  • Before adding water to your inverter battery, make sure the battery is cool enough to touch. This will ensure your safety and prevent any spills or splashes.
  • Check the battery’s water level and ensure it is at the correct level, as indicated by the manufacturer’s instructions. Generally, the water level should reach the top of the plates inside the battery.
  • Use a funnel when adding water to the battery. This will help minimize spills and splashes when pouring water directly into the storm.
  • When adding water, slowly pour it over the edge of the cell and make sure not to splash it around. Do not pour too much water at once, as this can lead to overflowing.
  • Wait a few minutes after filling the battery before adding more water. This will allow time for any bubbles or foam that may have formed due to the addition of water.
  • Never add acid or other chemicals to your inverter battery, as this can damage it.
  • Always wear gloves and safety glasses when handling an inverter battery to protect yourself from any potential spills or splashes.
  • After filling your inverter battery with water, check the terminals for any signs of corrosion or deposits that could indicate a problem with the battery. If present, clean them off with baking soda and water before use.
  • If you plan on storing your inverter battery for long periods, check the water level every month or two and fill it up if necessary. This will help keep your battery in good condition until you need to use it again.


Filling your inverter battery with water is an essential part of maintaining it. This process can be intimidating at first, but with the proper guidance, it can become a simple task. We’ve covered the basics of filling water in an inverter battery and some essential tips and tricks to help you along the way.

So, this was all from my side on this article of How to Fill Water in Inverter Battery. If you have any further query, you can contact me on my mail ID. Thanks again for going through this article.

1 Comment

דירות דיסקרטיות בירושלים · 30/01/2023 at 4:07 pm

Very nice post. I definitely love this website. Thanks!

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *